From the brand
Product Description



Technical Parameters
- Brand: Gocheer
- Max Air Pressure: 20-40PSI
- Max Flow: 8-10Lpm
- Rated Voltage: DC12V
- Rated Current: 1.0A
- Input: 100-250V, 50/60Hz, 0.6A Max
- Instruction Manual: Yes
WHY IS AN UPGRADED AIRBRUSH KIT?
Gocheer continues to provide better products for art enthusiast, from the manufacturing process to the products details we have been guaranteeing to make better.
- Higher Air Pressure and Airflow, increase 60% in performance. Whether it is spray gun makeup, nail art or art painting, cake decoration, model coloring use your unlimited imagination to create!
- Dual-Action airbrush gun makes you better create as you like. Press down dual-action trigger controls can control the air, press down trigger then pull back to control the paint.
- Airbrush set has cleaning kit. Airbrush pen needs to be cleaned in time when it is not in use
| | |
---|---|---|
3 Working ModesThe new airbrush compressor is equipped with 3 working modes and LED touch buttons. 3 colors represent different air pressure: Yellow (Low 20PSI) Blue (Medium 30PSI) Green (High 40PSI) | Excellent CompatibilityThe braided hose that comes with airbrush set and 1/8 male to male interface make the air brush has better compatibility, so can connect with almost all kinds of airbrush pens to work. | Easy to StoreAirbrush holder included in the airbrush kit, the airbrush holder can be inserted into the interface next to the airbrush compressor then the airbrush gun can be placed on it when you don’t need to use. |

YOU CAN DO EVERYTHING
TAKE A ATTENTION
- Please test airbrush kit with clear water before using pigment or paint to make sure that the airbrush is not clogged to spray normally.
- When using acrylic paint, please use water instead of thinner to thin the acrylic paints.
- Please clean it after use, otherwise the liquid will solidify and block the nozzle.
- If the airbrush is not able to spray liquid, it may also be that the fluid control knob is too tight, please adjust the tail screw. Or it may be that the nozzle is blocked. Please remove and clean the nozzle. Please refill cup with alcohol or cleaning solvent, then block the needle cover with a finger and spray. The air flows backward into nozzle to clean the paints remained the airbrush. Please repeat it 2-3 times.
- If the paint and liquid are too thick or encounter the problem of not being sprayed, suggest properly dilute it with water or thinner or replace with a suitable nozzle.
- If the airbrush is not able to spray liquid, maybe the fluid control knob is too tight, please adjust the tail screw. Usually the tail screw does not need to be adjusted frequently.