From the brand
1.Please fully charge the battery before flying the airplane.
2.Please fly the airplane in a wide place so it will not impact something and get damaged easily.
3.If the airplane dive to ground when it take off please follow the instruction to asjust the elevator by elevator trimmer or push rod.
4.If you need any replacement parts for this airplane you could find them in our store easily.
5.If battery at a low voltage you will get a delayed response from plane, so please get the plane back when you find that the plane is not working properly.
XPILOT Stabilization System is a trustable flight control assistant that helps beginner get started to enjoy flying easily.
- Easily learn to fly with 3 levels- strong assist for beginner, soft assist for advanced, no assist for expert.
- Stabilize your plane in windy conditions.
- One-key U-turn to prevent the plane from flying away.
Great Remote Control Airplane: Easy to Control
Xpilot gyro stabilizer system provides superb stable flying even controlled by rookie pilot.
The self-stabilization of gyro system will help flying in any weather condition even in windy days.
3-level flight control assists(Beginner level with full assist/ Intermediate with partial assist/ Expert for manual control) help beginners learn to fly radio control airplane step by step.
- Material: EPP Foam
- Size: 400mm * 330mm
- Flying Weight: 1.76oz
- Motor: φ8mm Coreless
- Battery: 3.7V 250mAh
- Radio: 2.4Ghz + 6-AXIS 3-Channel
- Control Distance: 656ft
- Flying Time: About 20 mins for each battery
Long Time Flying
This remote control airplane is a backward pusher glider so it can slowly glide in the sky without power support.
Due to this design, the remote control plane can save more power and have a longer flight time up to about 20min. You can have more fun with it!
Special Foam: Light, Durable, Flexible
Special EPP foam material can keep this glider plane at light weight in the air and provides flexibility and durability to keep the plane from crashing damage.
2.4GHz Radio Control
The 2.4Ghz technology allow more than 20 aircraft’s to fly at the same time and flying up to 200 meters that you can not see it. You can play it with your friends and have more fun.
Ready to Fly (RTF)
Completely Assembled for quick start
Within 2 minutes after unpacking, you will be able to get started and enjoy the fun while others are figuring out how to glue and assemble their planes!
What’s more fun is the fully assembly package will make it portable with you whereever you go.
- RC Airplane *1
- Remote Controller *1
- 3.7V 250mAh Battery*2
- USB Charger *1
- Spare Part: Propeller set *2
- Manual *1
- This is a sophisticated hobby product and NOT a toy. It must be operated with cautions.
- Please read all through the manual completely before play and follow the instructions carefully.
- Please fully charge the battery every 3 months if you don’t use this plane.
- Actual product may vary slightly from photos shown.
|Plane/Propeller stop working||Verify the battery condition firstly. Then check the plane throttle and steering. The motor may out of position if throttle just respond with noise and prop not working. Need a long iron bar to move the motor back to position. If you cant hear motor working, then probably is the receiver mistake, need to replace it.|
|Plane cant fly/Plane not work||Check if you connect the plane battery firstly then start the remote to bind them together. Ensure the throttle had been unlocked before flying, by pushing the left rod of controller up and down. Motor dislocation caused by plane crash may also have this issue. If everything fine, try throttle and steering, to see if receiver working good.|
|Elevation not working/No lifts||Be sure the remote and plane being well pairing. Elevator mistake may also cause plane nosedrive and cant fly well. Check if elevator being well centered, adjust it by aileron trimmer button on controller, or manually move the push rod of elevator by its arc-shaped section slightly. If everything ok, then may caused by receiver mistake.|
|Steering hard or cant turning||Make sure you connect the remote with rc plane well. Check if rudder being well centered, adjust it by rudder trimmer button, or manually move the push rod of rudder by its arc-shaped section slightly. If center good, then try throttle and check if motor working to exclude receiver problem. If nothing bad, then it’s a servo problem.|
|Avoid plane to fly away||Keep in mind to fully charge the battery before flying. Follow the right pairing step for plane and remote. Firstly connect the plane battery then start the controller. Make sure you play the plane within control range, avoid to play it around high interference sites.|
|Prop fall off/keep spinning||Normally, prop fall of means propeller saver is working to prevent propeller broken when plane hit something. Otherwise pls check the propeller base, see if there is any damage, need to replace the prop base. Receiver abnormity may cause the plane propeller cant stop spinning.|