From the brand
Product Description

VOLANTEXRC 2.4Ghz 2-CH Remote Control Airplane Ready to Fly with Gyro Stabilization System & 2 Rechargeable Batteries for Beginner
The rc plane Sport Cub S2 is made of durable EPP foam material which is light weight and safe in crash. 3 propellers and 3 wheels design make this remote control plane be able to fly fast and easy to be landed on multiple surfaces. 2.4Ghz remote control system allows pilots to fly multiple rc airplanes at the same time without any interference while react at a fast speed. Comes with pre-assembled kits and ready to fly, no installation required. Great gift for kids and adults who is interested in rc hobby, just take it and have a exciting adventure.


CARBON FIBER SUPPORT
Combined with high quality carbon fiber support, the wing span got enough support, which make whole fuselage more durable, and allow the rc aircaft fly stable and faster than ever before. Will be a perfect gift to accompany your kids outdoor pleasure time!
2.4Ghz Remote Control Airplane
Get more fun with it
This rc plane built by high quality structure parts such as rear wing, main wing, propellers and landing gear etc, make the whole plane body strong and durable to play, would be a great rc hobby choice for you.
Specification:
- Material: EPP Foam
- Size: 285*400*100mm
- Flying Weight: 1.76oz
- Motor: 7mm coreless * 2
- Battery: 3.7V/400mAh Lipo
- Radio: 2.4Ghz + 2-CH
- Control Distance: 120m
- Flying Time: 15-20 mins for each battery
| | |
---|---|---|
2.4GHZ Remote Control SystemLong range rc flying allowed when it controlled by 2.4GHZ signal system, Play distance up to 120 meters around, well anti signal jamming and let you play with multiple planes at the same time. No worry get lost or it fly away. | Gyro Stabilization SystemKeep the rc plane flying stably in sky, be fearless to breeze and other uncertain airflow, make it easy for all level experiences rc hobby lover to play and control, especially for beginner, find more fun pleasure in blue sky. | Two Takeoff ModesEasy it is to take off with two ways, the first is holding the airplane in hand with throttle push up to 2/3 at the same time, then throw out forward to fly; The second will be pushing up the joystick to keep it taxxing for 5-10 meters on the runway then take off. |

Ready to Fly (RTF)
Completely Assembled for quick start
Within 2 minutes after unpacking, you will be able to get started and enjoy the fun but curiously figuring out how to assemble the airplane!
What’s more fun is the fully assembly package will make it portable with you whereever you go, to picnic, hiking etc.
Package Included
- RC Airplane *1
- Remote *1
- Propellers *4
- 3.7V/400mAh Lipo *2
- USB Charger *1
- Manual *1
CAUTION:
- This is a sophisticated hobby product and NOT a toy. It must be operated with cautions.
- Please fully charge the battery every 3 months if you don’t use this plane.
- Please read all through the manual completely before play and follow the instructions carefully.
- Actual product may vary slightly from photos shown.
Troubleshooting
Plane/Propeller stop working | Verify the battery condition firstly. Then check the plane throttle and steering. The motor may out of position if throttle just respond with noise and prop not working. Need a long iron bar to move the motor back to position. If you cant hear motor working, then probably is the receiver mistake, need to replace it. |
Plane cant fly/Plane not work | Check if you connect the plane battery firstly then start the remote to bind them together. Ensure the throttle had been unlocked before flying, by pushing the left rod of controller up and down. Motor dislocation caused by plane crash may also have this issue. If everything fine, try throttle and steering, to see if receiver working good. |
Elevation not working/No lifts | Be sure the remote and plane being well pairing. Elevator mistake may also cause plane nosedrive and cant fly well. Check if elevator being well centered, adjust it by aileron trimmer button on controller, or manually move the push rod of elevator by its arc-shaped section slightly. If everything ok, then may caused by receiver mistake. |
Steering hard or cant turning | Make sure you connect the remote with rc plane well. Check if rudder being well centered, adjust it by rudder trimmer button, or manually move the push rod of rudder by its arc-shaped section slightly. If center good, then try throttle and check if motor working to exclude receiver problem. If nothing bad, then it’s a servo problem. |
Avoid plane to fly away | Keep in mind to fully charge the battery before flying. Follow the right pairing step for plane and remote. Firstly connect the plane battery then start the controller. Make sure you play the plane within control range, avoid to play it around high interference sites. |
Prop fall off/keep spinning | Normally, prop fall of means propeller saver is working to prevent propeller broken when plane hit something. Otherwise pls check the propeller base, see if there is any damage, need to replace the prop base. Receiver abnormity may cause the plane propeller cant stop spinning. |