From the brand
Product Description

AT9S Pro RC Transmitter and Receiver
*Frequently Asked Questions and User Manual’s documents could be found on this page below.
*To works with Drone, you could replace the receiver to mini size model R12DSM, R6DSM

- Voltage Telemery Support: Real-time airplane voltage monitor on AT9S Pro screen when paired with voltage telemetry module PRM-01. To telemetry flight information on radio’s screen like battery voltage, speed, altitude, RSSI, yaw roll and more, AT9S Pro should equip with PRM-03 module and flight controller APM, Pixhawk, Mini Pix, Turbo Pix.
- Programmable Mix Control: Easy to understand graph view, 5-12 channels can be programmed to any advanced setting. An Airbrake can be programmed by using pre-programmed mixes. Multi-servo elevator mixing for Flying Wings or V-Shaped tail models.
- Friendly Remind: Low RSSI, low voltage and throttle position alarm, with DD sounds, vibration and words remind you on outdoor readable LCD.
- Channel Servo Travel Display: Each channel travel can be real-time display on radio screen, press EXIT from home page into this page.
| | |
---|---|---|
Simulator/TBS Crossfire Support
| Firmware Update & Data Copy
| Package Comes with Lanyard
|
| | |
---|---|---|
R9DS 10 Channels Receiver
| Radiolink Voltage Protection System
| Compatible with Variety of Radiolink Receivers
|
Specifications:
Model Name | AT9S Pro |
Channel Support | 10 or 12 |
Spread Spectrum Mode | DSSS&FHSS/CRSF |
Model Memories | 15 |
Operating Voltage Range | 7.4~18.0V |
Frequencies Band | 2.4GHz ISM band(2400MHz~2483.5MHz) |
Operating Current | DSSS&FHSS< 90mA@12V /CRSF Depends on the transmission power selected |
Backlight LCD Screen | 320×480 Pixel, 2.8 inch outdoor readable LCD |
Compatibility Receiver | Radiolink R12DS, R12DSM, R9DS, R6DS, R6DSM, CRSF from BLACKSHEEP |